REMOTE TERMINAL UNITS
Kimray's family of RTUs form the centerpiece of Kimray's automation products. The DACC 3000, 2000, & 500 RTUs all share the same basic microprocessor based design, memory, controls, and operating system. Each model provides different I/O (input/output) interface and communications configurations.
Features:
Multi--run flow computers for gas and liquid
AGA 3 & 7, 1985 & 1992 standards, NX-19 & AGA 8
API 21.1 compliant custody transfer gas measurement
V-Cone® meter measurement
Digital, multi-variable transmitter interface
Plunger lift control and data logging
Wireless plunger lift well head interface
Complete production control using PROControl
• Condition and/or time based intermit control
• Plunger lift
• Flow control (rate, back pressure, pressure reducing, etc.)
• Volume control
• Sampler and injection control
Multi-drop distributed I/O CIM modules
Production control event storage
Analog history storage
30 second trending of analog values
Complete protocol for remote RTU management
Complete communications capability
Store & forward communications
MDS radio sleep mode support
Cry-out (report-by-exception) communications capability
Efficient protocol for pay-by-the-byte communications
Communications support for various devices
• MODBUS ASCII & RTU, master or remote
* Siemens level probe
• Baker and GRC downhole pressure instrument
• Entronic compressor control system
• Capstone generator
• Various variable speed drives
• Altronic DE-2200 annunciator
• Murphy annunciator
Built in solar charging regulator
Aluminum enclosure
LCD Display
LOS jack (user interface)
|
|
DACC 3000 RTU
Single board design
Expansion board available
8 analog in, 4-20mA & 1-5 VDC
2 RTD in, 100 ohm platinum
2 analog out, 4-20mA & 1-5 VDC
8 digital in, contact closure
8 digital out, relay
2 accumulator in, high speed
4 RS-232 ports
MVT & CIM communication support
Modbus master device communications
DACC 2000 RTU
4 analog in, 4-20mA & 1-5 VDC
2 analog out, 4-20mA & 1-5 VDC
4 digital in, contact closure
4 digital out, relay
2 accumulator in, high speed
3 RS-232 ports
1 RS-485 port
MVT & CIM communication support
Modbus master device communications
DACC 500 RTU
2 RS-232 ports
Multivariable transmitter
Digital board (optional)
- 4 digital in, contact closure
- 1 accumulator in, high speed
- 3 digital out (2 relays & 1 open collector)
Analog board (optional)
- 2 analog in, 4-20mA & 1-5 VDC
Optional Enron Modbus protocol
DACC 200 RTU
Used for equipment monitoring
Cryout on alarm
1 RS-232 port
2 analog in, 4-20mA & 1-5 VDC
2 digital in, contact closure
1 accumulator in, high speed
3 digital out, 2 relay, 1 open collector
Firmware interchangeable with I/O CIM
Programming software |
